Transform Your Bath Space - Installation Guide For New Shower Units

Schedule Now



We have noticed this great article relating to How to Install a Direct-to-Stud Shower Enclosure down the page on the internet and believe it made perfect sense to relate it with you on my blog.


How to Install a Shower Enclosure
An effective shower installment needs cautious preparation as well as a lot of work. Most of the times, you will certainly need to do three sorts of jobs: mounting walls, mounting the plumbing, as well as finishing wall surfaces.

Prep work


Firstly, you must pick the kind of shower that you desire to set up. It is important to identify whether the selected shower is capable of managing certain systems and also can control a safe degree of water with the boiler. The majority of shower systems nowadays are designed to be adaptable to various water pressures (such as saved hot water and also cold keys).
It is likewise important to think about the water pressure and also the planning of the piping and also drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose as well as spray parts of the push-on mixer shower device can be linked to the bathroom tap as per your demand, and also the water temperature can be changed via the faucets. Push-on mixers are cheap and also exceptionally straightforward to mount. However, although the hose pipe connection is basic, it is conveniently displaced. Additionally, it is inconvenient to change the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this type of shower are combined with a bath mixer tap, as well as the temperature level can be readjusted through the bath taps. It is an extremely affordable choice as well as no additional plumbing is included. Nonetheless, the bath/shower mixers additionally suffer from bothersome temperature level control options.

  • Guidebook Mixer: The hose and also spray of a manual mixer shower unit are a part of the wall unit and the hot and cold water supplies are connected to a single valve The temperature and stress of the water are regulated via either one or a selection of handles (in extra costly showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are a lot more costly than the previously discussed mixers. They also require added plumbing of hot and cold water supply pipes.

  • Thermostatic Mixer: The hose and spray of this shower type are a part of the wall unit as well as the hot and cold water products are connected to a single shutoff below as well. It is total with a built-in stabiliser to self-adjust the water temperature and to prevent it from becoming too hot. Among the biggest benefits of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is one of the most pricey of the various mixer alternatives.

  • Power Shower: A power shower is a single unit containing a powerful electrical pump that is capable of modifying both the water stress and also temperature level. This kind of shower can be fitted if there is supply of water from a cold water cistern and a hot water cyndrical tube. A power shower makes the change of both pressure and temperature level very easy. On the other hand, it disagrees for water heated up directly by the shower or where the water is supplied by a mix central heating boiler under mains stress.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats the water electrically. It is essential to note that for this shower type to be set up, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level as well as pressure to be adjusted via a handle. Versions with temperature level stabilisers are better as they stay unaffected by other faucets in other places being used within the family. A major downside of electrical showers is that the control handle only allows for the option of heats at much less pressure, or reduced temperature levels at a higher pressure. This is problematic in the winter when the spray is typically weak and the mains water is colder. Nonetheless, this issue is dealt with in some models which are readily available with a winter/summer setting.


  • Method


    Relying on the kind of shower you wish to mount, the shower head should either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
    Before beginning, it is a good idea to mark the placements of the shower head as well as control, and to prepare the pipe-work included. Additionally, the water drainage system to remove the drainage will require to be prepared. Both positions of the wire path and the shower button will certainly likewise need to be taken into consideration if an immediate or electric shower device is being set up.
    Use the guideline guide provided with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is very important to cut off the water. In order to secure the pipes, they need to be provided a waterproof covering as well as likewise fitted with isolating valves. The pipelines can then be hidden into the wall surface as well as plastered over to neaten the general appearance.
    Fit the base tray, shower head, as well as installations.
    Link the main shower control to the pipelines that will be providing the water (This may call for a female screw string adapter).
    Reconnect the water system and examination the pipes for any type of leaks, as some might require tightening.
    If you are mounting an electrical shower, bear in mind to switch off the electricity supply prior to making any kind of electric connections. Once these links have actually been made (there must be advice within the instruction manual), the power supply can be changed back on.

    Readjusting Water Pressure to Fit Your Shower


    The cold water reservoir can be lifted to a better height (occasionally as little as 150mm (6inches)) by fitting a solid wood support underneath it - possibly composed of struts as well as blockboards. If you pick this option, the primary and also distribution pipelines will certainly also have to be elevated to meet the new elevation of the reservoir.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it should be linked right into the power supply in order to operate.

    Piping as well as Drain


    It is best to make use of 15mm diameter supply pipes, and also make the go to the shower as short as well as straight as feasible so regarding maintain maximum stress and also reduce heat loss. Furthermore, by reducing making use of elbows for pipe corners, you can reduce the resistance in the flow of the water. You can attain this by bending the pipes instead.

    A Lot Of Usual Mistakes


  • Breaking or disregarding regional code limitations.

  • Making use of pipelines that are also small.

  • Attaching copper to galvanized without using a brass or dielectric fitting between both.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Uneven your fixtures when installing them.

  • Not installing an air gap filling for fixtures.

  • Cutting supply stub outs as well short to set up the shutoff valves onto after the completed wall surface remains in area.

  • Not effectively straightening tubes right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will create a leakage.).

  • When transforming the water back on in your house, constantly run the outdoors tube shutoff or purge your commodes to hemorrhage dust and also air from the lines. This particles can trigger problems in your sink faucets and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Build a Shower Enclosure for Your DIY Bathroom

    I'm just very fascinated with How to Install a One-Piece Shower Unit and I hope you enjoyed reading the new post. Sharing is good. You never know, you may be doing someone a favor. I cherish reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.




    Make An Appointment


    Leave a Reply

    Your email address will not be published. Required fields are marked *